Pfaff ambition Owner's Manual - Page 45

Maintenance Cleaning the machine To keep your sewing machine operating well, clean it often. No lubrication (oiling) is needed. Wipe the exterior surface of your machine with a soft cloth to remove any dust or lint built up. Wipe the screen with a clean, soft and damp cloth. Cleaning the bobbin area Note: Raise the needle, lower the feed dogs and turn off the machine. Remove the presser foot. Push the bobbin cover release button (A) to the right and remove the bobbin cover (B) and the bobbin. Use the screwdriver to remove the two screws (C) in the stitch plate. Lift up the stitch plate. C B C A Clean the feed dogs and the bobbin area with the brush found with the accessories. Cleaning under the bobbin area Clean the area under the bobbin case after sewing several projects or any time you notice an accumulation of lint in the bobbin case area. Remove the bobbin case by lifting it up. Clean the area with the brush or with a dry cloth. Put the bobbin case back into the hook race so that the tip fits into the stopper (D). Note: Do not blow air into the bobbin case area. The dust and lint will be blown into your machine. Replacing the stitch plate With the feed dogs lowered, replace the stitch plate and insert and tighten the two stitch plate screws. Replace the bobbin cover. D 5:1 Maintenance