Pfaff ambition Owner's Manual - Page 6

Introduction Accessories Included accessories 40. Bobbins (5) (#416475801) 41. Felt pad 42. Screwdriver for needle plate 43. Multi-purpose tool 44. Spool cap, large (2) 45. Spool cap, small 46. Seam ripper & brush (as one) 47. Stylus (ambition™ 1.5) 48. Edge guide 49. Auxiliary spool pin Included accessories not in picture • Foot control • Power cord • Needles • Hard cover 41 40 44 45 47 48 42 43 46 49 Presser feet Standard presser foot 0A with IDT™ system (attached on the machine upon delivery) This foot is used mainly for straight stitching and zigzag stitching with a stitch length longer than 1.0 mm. Fancy stitch foot 1A with IDT™ system This foot is used for decorative stitches. The groove on the underside of the foot is designed to flow smoothly over the stitches. Fancy stitch foot 2A When sewing decorative stitches or short zigzag stitches and other utility stitches with less than 1.0mm stitch length, use this foot. The groove on the underside of the foot is designed to flow smoothly over the stitches. Blindhem foot 3 with IDT™ system This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide on the foot is designed to ride along the fold of the hem edge. Zipper foot 4 with IDT™ system This foot can be snapped on either the right or the left of the needle, making it easy to sew close to both sides of the zipper teeth. Move the needle position to the right or left to sew closer to zipper teeth. One step Buttonhole foot 5B This foot has a space in the back to set the size of the buttonhole. The machine will sew a buttonhole to fit that button size. Important: Make sure that the IDT™ system is disengaged when using presser foot 2A, 5B. 1:6