Pfaff ambition Owner's Manual - Page 16

Preparations Inserting the bobbin Make sure that the needle is fully raised and the machine is turned off before inserting or removing the bobbin. Open the bobbin cover by pushing the release button to the right (A). Remove the cover (B). 1. Insert the bobbin in the bobbin case with the thread running in a counterclockwise direction. 2. Pull the thread through the slit (C). 3. With a finger held gently on top of the bobbin, draw the thread at the arrow markings into the stitch plate thread guide from (C) to (D). 4. Pull the thread at the arrow markings into the stitch plate thread guide from (D) to (E). 5. To cut off excess thread pull thread back over the cutting off blade at point (E). 6. Replace the bobbin cover. 1 3 D E 2 B A 4 C IDT™ system (integrated dual feed) For sewing any fabric precisely, PFAFF® ambition™ sewing machine provides the ideal F solution: the integrated dual feed, IDT™ system. As on industrial machines, the IDT™ system feeds the fabric from the top and bottom at the same time. The fabrics are fed precisely. On light fabrics such as silk or rayon the dual feed prevents puckering of the seam. The even feeding action also ensures perfect matching of checked and striped fabrics. The IDT™ system keeps all layers of quilt projects aligned to prevent shifting of the layers. Engaging the IDT™ Important: For all work with the IDT™, use presser feet with the center back cut-out (F). Raise the presser foot. Press the IDT™ system down until it engages. Disengaging the IDT™ Raise the presser foot. Hold the IDT™ with two fingers at the ribbed ankle. Pull the IDT™ down, then pull it away from you to release the IDT™ slowly upward. 2:6