Pfaff ambition Owner's Manual - Page 20
Buttons for, machine
View all Pfaff ambition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
9 1 17 2 15 3 14 4 16 10 Preparations 22 5 18 19 20 21 6 17 7 8 Buttons for ambition™ 1.5 machine 12 11 11 Needle up/down with indicator (1) Press this button to move the needle up or down. The setting of the needle stop position is changed at the same time. The indicator is lit when needle down is activated. You can also tap the foot control to raise or lower the needle. Stitch restart (2) If you stop sewing in the middle of the stitch, press stitch restart to start sewing at the beginning of the stitch again without having to reset any special settings you have made. If you press the stitch restart button while you are actively sewing, the stitch will be finished and the machine will then stop. Immediate tie-off (3) Press the tie-off button while sewing and your machine sews a few tie-off stitches and stops automatically. Speed control lever (4) The speed control lever sets the maximum sewing speed. To increase sewing speed, slide the lever to the right, to decrease sewing speed, slide the lever to the left. Start/stop (5) Press this button to start or stop the machine without using the foot control. Press the button once to start and press it again to stop. 2:10 12 13 15 14 16 23 24 25 Reverse (6) with indicator (7) For permanent reverse, press the button before starting to sew. The reverse indicator (6) will be lit and the machine sews in reverse until you press the button again to cancel. If you press the reverse button while sewing, the machine sews in reverse for as long as you keep the button pressed. The reverse indicator is lit when the reverse button is pressed. Reverse is also used when sewing buttonholes, programmed tie-off end and darning stitches to step between the parts of the stitch. Programmed tie-off (6) with indicator (8) The programmed tie-off indicator is lit to indicate that one or several tie-off options are activated. The indicator stays lit until the tie-off options are no longer in use.