Pfaff creative 2170 Owner's Manual - Page 107

C D Information When touching the information icon you will get information about the embroideries on your screen (C). "Actual" indicates the last selected design. "Selected" indicates which designs are selected and "Num of entries" indicates how many designs you have on your screen. You will also find information about the length and width of the designs. Data Manager In the Data Manager you will find your stitches and embroideries that have been saved in the machine. Read more about the Data Manager on page 5:36. Embroidery speed When you are embroidering the machine sets the speed according to what hoop you are using and the length of stitches. If you use a small hoop, the speed will be set to a higher level than if you are embroidering in a large hoop. If you are embroidering on a larger hoop than the 80x80 hoop, you can increase the speed by touching the Context menu and choosing Embroidery Speed. You will see that Auto is selected and that you have the option to choose between Medium and High. Set the embroidery speed after the machine has made the hoop detection because the hoop detection will always set the embroidery speed to Auto. IMPORTANT! The embroidery quality may be compromised when embroidering at a higher speed. Back to default setting This function allows you to reset all the machine settings that you have previously changed, such as the stitch settings or sewing functions, to the default settings. You can also reactivate the information texts. All the texts are shown automatically. You need to touch OK to confirm. Thread snips You can turn off the Thread snips function permanently with this selection. When you touch the Thread snips icon a window appears (D) where you can choose between Off and Auto. If you touch Off and confirm with OK, the threads will no longer be cut, even if you have selected the icon in the Tie-off program. The standard setting is Auto which means that the threads are automatically cut. Embroidery 5:9