Pfaff creative 2170 Owner's Manual - Page 108
Embroidery accessories, Attaching the embroidery foot, Inserting a card
View all Pfaff creative 2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Embroidery accessories With you creative 2170 you have been provided with accessories for embroidering. You will get an embroidery unit, four clips, 3 hoops (225x140, 120x115 and 80x80 with hoop adapter), a 300 card and booklet, a template, a quick embroidery packet, embroidery threads and an embroidery foot. Before hoop embroidering you must lower the feed dogs, disengage the IDT and attach the embroidery foot (see page 5:11). Embroidery Attaching the embroidery foot 1. Remove the standard presser foot. Carefully loosen the screw (A) until the cross-hole (B) is accessible. 2. Squeeze the embroidery foot gently together and guide the pin of the foot into the cross hole of the presser foot holder as far as it will go. 3. Tighten the screw (A). To remove the embroidery foot loosen the screw (A), squeeze the embroidery foot together and pull it out to the right. Tighten the screw (A). A B 1. Inserting a card Insert a creative card into the front or rear card drive, in the direction of the arrow, as far as it will go. The release button springs out approximately 6 mm (1/4'') when the card is inserted properly. To remove the creative card push the release button (C) next to the relevant card drive. 5:10 2. 3. C C