Pfaff creative 2170 Owner's Manual - Page 83

Placing single stitches For each additional stitch you want to place, touch the confirm icon (E). To move single stitches With your stylus or your finger you can work with your stitches V directly on the work space by dragging and dropping a selected stitch point. To position a stitch point just touch it on the screen and drag it to the desired position. When you do this you will change the stitch width E and the stitch length of the selected stitch. Another way to move the stitch point of a selected stitch and for fine adjustment is to use the stitch length (T) and stitch width icons (U). The last stitch of the sequence is marked with blue and the last stitch T point is marked with a red frame. U The dotted line, the cursor line (V), at the end of the last stitch shows where the following stitch will be added (if the x-coordinate of the last stitch is not the same as the first stitch). This ensures that the fabric is fed evenly when you sew out your stitch pattern. If you place the last stitch exactly at the same position (x-coordinate) as the first one of your stitch pattern the dotted cursor line will not be sewn. Touch the Start sewing (E) to open the sewing menu. Now you can see the whole sequence of your stitch pattern and sew it. Only when this screen is open you can sew out your stitch pattern. Touch ESC to return to the Stitch Creator menu, for further editing. Decorative sewing 4:13