Pfaff performance 2058 Owner's Manual - Page 24
Preparing the machine for bobbin winding, Winding the bobbin from the spool pin
View all Pfaff performance 2058 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Bobbin winding Preparing the machine for bobbin winding Place an empty blue bobbin on the bobbin winder aligning the small rectangular hole on the bottom side of the bobbin with the small white pin of the bobbin winder. The Pfaff logo is facing up. Push the bobbin to the right. Note: The bobbin can only be wound if it is moved fully to the right. Winding the bobbin from the spool pin Place the sewing thread on the spool pin. Slide a spool cap firmly against the spool. Three different spools caps to accomodate any type of thread spool are included with your machine. Choose a spool cap that is the same size or slightly larger in diameter than the spool. C 2:6
2:6
C
Bobbin winding
Preparing the machine for bobbin winding
Place an empty blue bobbin on the bobbin winder aligning the small
rectangular hole on the bottom side of the bobbin with the small
white pin of the bobbin winder. The Pfaff logo is facing up.
Push the bobbin to the right.
Note
: The bobbin can only be wound if it is moved fully to the
right.
Winding the bobbin from the spool pin
Place the sewing thread on the spool
pin. Slide a spool cap
fi
rmly against the
spool. Three different spools caps to
accomodate any type of thread spool are
included with your machine. Choose a
spool cap that is the same size or slightly
larger in diameter than the spool.