Pfaff performance 2058 Owner's Manual - Page 28
Turn off the on/off switch
View all Pfaff performance 2058 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Threading your machine Turn off the on/off switch Raise the presser foot. Place the thread on the spool pin and fit a spool cap, either the same size or slightly larger than the spool, on top of the spool. Using both hands, pull the thread into thread guide A from the front. Place the thread from the right underneath the pre-tension disc B. Now pass it through the tension disk C in the left threading slot. Pull the thread down, around the stop D, into the right threading slot and up to the take-up lever E. The thread must be pulled into the takeup lever from left to right. Pass the thread down in the right-hand threading slot. Pull the thread from the side behind the left thread guide F. B A C E D F 2:10
2:10
A
B
D
F
C
E
Threading your machine
Turn off the on/off switch
Raise the presser foot. Place the thread on the
spool pin and
fi
t a spool cap, either the same
size or slightly larger than the spool, on top of
the spool.
Using both hands, pull the thread into thread
guide A from the front.
Place the thread from the right underneath the
pre-tension disc B.
Now pass it through the tension disk C in the
left threading slot.
Pull the thread down, around the stop D, into
the right threading slot and up to the take-up
lever E. The thread must be pulled into the take-
up lever from left to right.
Pass the thread down in the right-hand
threading slot.
Pull the thread from the side behind the left
thread guide F.