Philips 32PFL3504D User manual - Page 16

English Watch a DVD To watch a DVD 1 Insert a DVD disc into your player. 2 Press on the remote control of the DVD player to select channels. » The DVD might automatically play on the TV. If the picture does not appear 1 Press SOURCE repeatedly to select the DVD player and wait a few seconds for the picture to appear. 2 Use the remote control of the DVD player to play the disk. Switching Audio Mode This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press SAP to display the currently selected audio mode.While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel. 6 SAP / STEREO When all audio are available SAP / STEREO SAP / MONO SAP / STEREO When stereo and monaural audio are available MONO / STEREO MONO / STEREO When SAP and monaural audio are available SAP / MONO SAP / MONO When only monaural audio is available MONO (Cannot be switched) STEREO SAP MONO : Outputs stereo-audio : Outputs second audio program : Outputs mono-audio DTV 1 Press SAP to display the currently selected language and the number of available languages. 6.1 English 1/3 2 Press SAP repeatedly to cycle through the available audio languages. • Available languages differ depending on the broadcast. [Other] is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. Note • SAP does not control external audio devices. • The information display will automatically disappear in a few seconds. EN 15