Pioneer DEH-P8400BH Owner's Manual - Page 24

Section 03 Available accessories Available accessories Switching the SIRIUS display 1 Press /DISP. Play time-Channel number-Channel name -Category name-Artist name-Song title/ program title-Composer name ! The play time is displayed during Instant Replay mode. Refer to Using the Instant Replay function on this page. ! Play time display indicates the time inverted from the live broadcast. The play time is displayed as a negative number. Displaying the Radio ID 1 Turn LEVER to select CH 000. ! To select CH 000, set the channel select set- ting to Channel number. About the channel select setting, refer to Channel mode (channel select mode setting) on this page. Note It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to a SIRIUS tuner or select a channel. Storing and recalling broadcast stations You can easily store up to six stations for each band as presets. ! Six stations for each band can be stored in memory. 3 Use M.C. to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing or or turning LEVER. Function and operation 1 Press M.C. to display the main menu. 2 Use M.C. to select FUNCTION. The function selection menu is displayed. Turn to change the menu option. Press to select. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. Channel mode (channel select mode setting) You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category. 1 Press M.C. to change the channel select mode. Channel number (channel number select setting)-Category (channel category select setting) Game alert (game alert setting) 1 Press (list). Preset screen is displayed. 2 Use M.C. to store the selected station in memory. Turn to change the preset number. Press and hold to store. The SIRIUS preset number you have selected will flash and then remain lit. The selected station has been stored in memory. 24 En This system can alert you when games involving your favorite teams are about to start. To use this function you need to set up a game alert for the teams in advance. ! To use this function, a Pioneer SIRIUS bus in- terface (e.g. CD-SB10) is required. ! To use this function, a SIRIUS plug-and-play unit with a Game Alert Function is required. ! For details, refer to the SIRIUS plug-and-play unit's manuals. ! You can also operate this function when a SIR- PNR2 is connected to this unit. ! The Game Alert function is on at the default setting. ! Once you select the teams, you need to turn the Game Alert function on. 1 Press M.C. to turn the Game Alert on or off. ! When a game of the selected team is about to start (or is currently playing) on a different station, Game alert info is displayed. Press and hold M.C. to switch to that station, and you can listen to that game. Team setting (team setting) 1 Press M.C. to select the function. 2 Turn M.C. to select a desired league. 3 Turn M.C. to select a desired team. 4 Press M.C. to store the selected team in mem- ory. The game alert function is activated for that team. 5 Repeat these steps to select other teams. ! When FULL is displayed, additional teams cannot be selected. In this case, first delete a selected team and then try again. Game info (game information) If any games of the selected teams are currently playing, you can display information on the games and tune in to the broadcast channel. You can display information on the games while enjoying the sound from the station you are currently tuned in to. You can also tune in to the broadcast channel when you wish to. 1 Press M.C. to select the function. 2 Turn M.C. to select a game. ! The game score will be updated automatically. 3 Press M.C. to switch to the other station and listen to the game. ! If you have not selected any teams, NOT SET is displayed. ! When games involving your favorite teams are not currently playing, NO GAME is displayed. Pause (pause) During the Instant Replay mode, you can select Pause (pause). Refer to Using the Instant Replay function on this page. 1 Press M.C. to pause or resume. Selecting a channel from a channel category 1 Select the channel select settings to Category. Refer to Channel mode (channel select mode setting) on this page. 2 Push or channel category. to select the desired 3 Turn LEVER to select the desired channel from the selected channel category. Using the Instant Replay function The following functions can be operated in Instant Replay mode.