Pioneer DEH-X8600BH Owner's Manual - Page 12

Section 02 Using this unit Using this unit Using the Bluetooth telephone Important ! Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running can drain the battery. ! Operations may vary depending on the kind of cellular phone. ! Advanced operations that require attention such as dialing numbers on the monitor, using the phone book, etc., are prohibited while driving. Be sure to park your vehicle in a safe place and apply the parking brake before proceeding. Canceling call waiting 1 Press and hold . Adjusting the other party's listening volume 1 Turn LEVER while talking on the phone. ! When private mode is on, this function is not available. Turning private mode on or off 1 Press BAND/ while talking on the phone. Note If private mode is selected on the cellular phone, hands-free phoning may not be available. Setting up for hands-free phoning 1 Connection Use the Bluetooth telephone connection menu. Refer to Connection menu operation on page 12. 2 Function settings Use the Bluetooth telephone function menu. Refer to Phone menu operation on page 13. Basic operations Making a phone call Refer to Phone menu operation on page 13. Answering an incoming call 1 When a call is received, press . Ending a call 1 Press . Rejecting an incoming call 1 When a call is received, press and hold . Answering a call waiting 1 When a call is received, press . Switching between callers on hold 1 Press M.C. Using voice recognition This feature can be used on an iPhone equipped with voice recognition that is connected by Bluetooth. 1 Press and hold M.C. to switch to voice recognition mode. 2 Press M.C. and then talk into the microphone to input voice commands. To end voice recognition mode, press BAND/ . Notes ! For details on voice recognition features, check the manual for your iPhone. ! In order for your voice commands to be rec- ognized and interpreted correctly, ensure that conditions are suitable for recognition. ! Please note that wind blowing through the vehicle windows and noise coming from outside the vehicle can interfere with voice command operation. ! For optimum pick-up, the microphone should be placed directly in front of the driver at a suitable distance. ! Speaking too soon after the start of the command may cause voice recognition to fail. ! Speak slowly, deliberately, and clearly. 12 En Connection menu operation Important Connected devices may not work properly if more than one Bluetooth device is connected at a time (e.g. a phone and a separate audio player are connected simultaneously). 1 Press and hold to display the connection menu. # You cannot perform this step during a call. 2 Turn M.C. to select the function. Once selected, the following functions can be adjusted. Device list (connecting or disconnecting a device from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to connect/disconnect. ! Press and hold M.C. to swap between the Bluetooth device address and the device name. 3 Press M.C. to connect/disconnect the selected device. Once the connection is established, Connected is displayed. ! When no device is selected in the device list, this function is not available. Delete device (deleting a device from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to delete. ! Press and hold M.C. to swap between the Bluetooth device address and the device name. 3 Press M.C. to display Delete YES. 4 Press M.C. to delete the device information from the device list. ! When no device is selected in the device list, this function is not available. ! While this function is in use, do not turn off the engine. Add device (connecting a new device)