Pioneer DEH-X8600BH Owner's Manual - Page 7

Using this unit Using this unit Section 02 English Selecting a band 1 Press BAND/ until the desired band (FM-1, FM-2, FM-3 for FM or AM) is displayed. Manual tuning (step by step) 1 Turn LEVER. ! When an analog station is received, tuning down operation is conducted within the analog broadcasting. (6 d 2) ! If a digital broadcast is not yet received, tuning-up operation tunes in the next analog station. (2 d 6) Seeking 1 Turn and hold down LEVER. ! While turning and holding down LEVER, you can skip stations. Seek tuning starts as soon as you release LEVER. Storing and recalling stations for each band 1 Press (list). The preset screen is displayed. 2 Use M.C. to store the selected frequency in the memory. Turn to change the preset number. Press and hold to store. 3 Use M.C. to select the desired station. Turn to change the station. Press to select. # You can also change the station by pressing UP or DOWN. Switching the display Selecting the desired text information % Press /DISP. Channel and program service name/frequency -song title/artist name-album title/genre Notes ! If the channel and program service name are detected, the channel and program service name will be displayed. ! Depending on the band, text information can be changed. Using tag information For details, refer to Using tag information on page 20. For more details about iTunes tagging, refer to About iTunes tagging on page 31. Creating a new Pandora station You can create a new station in the Pandora source based on the tagged information. For details, refer to Tag menu on page 21. Function settings 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select FUNCTION. 3 Turn M.C. to select the function. Once selected, the following functions can be adjusted. BSM (best stations memory) BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength. 1 Press M.C. to turn BSM on. To cancel, press M.C. again. Local (local seek tuning) Local seek tuning allows you to tune in to only those radio stations with sufficiently strong signals for good reception. 1 Press M.C. to display the setting mode. 2 Press M.C. to turn local on or off. 3 Turn M.C. to select the desired setting. FM: Level 1-Level 2-Level 3-Level 4 AM: Level 1-Level 2 The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations. Seek mode (seek mode) Seek tuning setting can be changed between digital station seek (Seek HD) and all station seek (Seek ALL) depending on the reception status. 1 Press M.C. to select the desired setting. Seek ALL-Seek HD Blending (reception mode) If a digital broadcast reception condition gets poor, this unit automatically switches to the analog broadcast of the same frequency level. If this function is set to on, the tuner switches between digital broadcast and analog broadcast automatically. If this function is off, reception will be conducted within an analog broadcast. 1 Press M.C. to turn this function on or off. Note If Seek mode is set to Seek HD and Blending is set to off, the tuner cannot receive broadcasts. In this case, the seek mode or reception mode is changed automatically as follows: ! When Seek mode is set to Seek HD, if you switch Blending from on to off, Seek mode is changed to Seek ALL. ! When Blending is set to off, if you switch Seek mode from Seek ALL to Seek HD, Blending is changed to on. Radio Only for DEH-X8600BS and DEH-X7600S Basic operations 1 2 34 5 6 7 RDS 1 2 34 5 7 Non-RDS or AM 1 Band indicator 2 5 (stereo) indicator 3 Preset number indicator 4 LOC indicator Appears when local seek tuning is on. 5 Signal level indicator 6 Program service name 7 Frequency indicator Selecting a band 1 Press BAND/ until the desired band (FM-1, FM-2, FM-3 for FM or AM) is displayed. Manual tuning (step by step) 1 Turn LEVER. ! Select Manual (manual tuning) under Tuning Mode to use this function. En 7