Pioneer SPH-10BT Owners Manual - Page 25
Additional Information
View all Pioneer SPH-10BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Additional Information English Troubleshooting The display automatically returns to the normal display. → No operations have been made for about 30 seconds. - Perform an operation. The sound is intermittent. → You are using a device, such as a cellular phone, that may cause audible interference. - Move electrical devices that may be causing the interference away from the unit. The sound from the Bluetooth audio source is not played back. → There is a call in progress on a Bluetooth-connected cellular phone. - The sound will be played back when the call is terminated. → A Bluetooth-connected cellular phone is currently being operated. - Stop using the cellular phone. → The connection between the unit and the cellular phone is not established correctly after a call made by a Bluetooth-connected cellular phone. - Make a Bluetooth connection between the unit and the cellular phone again. Error messages Common AMP ERR → This unit fails to operate or the speaker connection is incorrect. → The protective circuit is activated. - Check the speaker connection. - Turn the ignition switch OFF and back to ON again. If the message remains, contact your dealer or an authorized Pioneer Service Station for assistance. NO XXXX (NO TITLE, for example) → There is no embedded text information. - Switch the display or play another track/file. USB device/iPhone READING → Sometimes there is a delay between the start of playback and when you start to hear any sound. - Wait until the message disappears and you hear sound. NO AUDIO → There are no songs. - Transfer the audio files to the USB device and connect. → The connected USB device has security enabled. - Follow the USB device instructions to disable the security. SKIPPED → The connected USB device contains DRM protected files. - The protected files are skipped. PROTECT → All the files on the connected USB device are embedded with DRM. - Replace the USB device. N/A USB → The connected USB device is not supported by this unit. - Disconnect your device and replace it with a compatible USB device. - 25 -