Pioneer SPH-10BT Owners Manual - Page 5

English Operating the smartphone holder WARNING • Do not use the built-in holder if your smartphone would cover, obscure or block indicators (lamps) relating to vehicle system status and operation, such as Passenger Air Bag status lamps, Air Bag Malfunction lamp, Anti-lock Braking System status, Electronic Stability Control (ESC) status, Hazard lamp activation, and controls related to heating, ventilation, air-conditioning and defrost functions and any related vents and fans. If you encounter any of these issue, use an appropriate alternate mounting device to secure the smartphone in a location that does not block indicators, controls or vents, violate the law, or cause a hazard. • Mount, remove, and adjust the smartphone and its orientation (vertical or horizontal) only when safely parked. • Before driving, make sure the smartphone is mounted securely so it does not separate from the mounting device during a sudden stop. Do not use the built-in holder if it is difficult to securely attach your smartphone to it or if bad road conditions could cause the smartphone to separate or fall from it. • Do not leave the smartphone in the built-in holder when leaving your vehicle. • Be careful not to get your hands or fingers caught in the moving parts while operating the built-in holder. Removing the smartphone holder 1 Detach the front panel (page 4). 2 Pull out the holder by holding the anti slip portion on the edge of the holder until the holder is completely visible. CAUTION Never pull up the holder until the holder is completely visible. 3 Pull up the holder vertically. - 5 -