Pioneer VSX-933 Instruction Manual English - Page 114

Contents ≫ Connections ≫ Playback ≫ Setup ≫ "Wireless": Wi-Fi connection using an access point such as a wireless LAN router. There are two methods for Wi-Fi connection. "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Share the Wi-Fi settings of your iOS device with this unit. If you select "Scan Networks", there are another two types of connection methods. Check the following. "Enter Password":Enter the password (or key) of the access point to connect. "Push Button": If the access point is equipped with an automatic setting button, you can connect without entering the password. • If the SSID of the access point is not displayed, select "Other..." with the cursor on the SSID list screen, press ENTER, and then follow the on-screen instructions. Keyboard Input To switch between upper and lower cases, select "A/a" on the screen, and press ENTER on the remote controller. Press +Fav on the remote controller to select whether to mask the password with "" or display it in plain text. Pressing CLEAR on the remote controller will remove all the input characters. • A confirmation screen asking you whether to agree to the privacy policy is displayed during network setting. If you agree, select "Accept" and press ENTER. „„5. ARC Setup To connect with an ARC-compatible TV, select "Yes". The ARC setting on this unit turns on, and you can listen to the TV's audio through this unit. • If you select "Yes", the HDMI CEC function is enabled and power consumption increases during standby. 114 Front Panel≫ Rear Panel≫ Remote≫