Pioneer VSX-933 Instruction Manual English - Page 88

Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. Setting Item Default Value Dolby Enabled 6.0 ft/1.80 m Speaker to Ceiling Reflex Optimizer Off Setting Details Set the distance between the Dolby Enabled Speaker and the ceiling. Select between "0.1 ft/0.03 m" and "15.0 ft/4.50 m" (0.1 ft/0.03 m units). • The unit of distance (ft/m) is displayed using the unit selected for the "Distance" setting. You can enhance the reflection effect of Dolby Enabled Speakers from the ceiling. "Off": When this function is not used "On": When this function is used • The function is not effective if the listening mode is Pure Direct. • This setting can be selected when "Configuration" - "Height Speaker" is set to "Dolby Speaker". Audio Adjust „„Dual Mono/Mono Change the settings of multiplex audio playback. Setting Item Dual Mono Mono Input Channel Default Value Main Left + Right Setting Details Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. "Main": Main channel only "Sub": Sub channel only "Main/Sub": Main and sub channels are output at the same time. • For multiplex audio broadcasts, pressing the button on the remote controller will display "1+1" on the main unit's display. Set the input channel to play 2-ch digital sources such as Dolby Digital, or 2-ch analog/PCM sources in the Mono listening mode. "Left": Left channel only "Right": Right channel only "Left + Right": Left and right channels 88 Front Panel≫ Rear Panel≫ Remote≫