Pioneer VSX-933 Instruction Manual English - Page 64

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Multi-zone You can enjoy 2-ch audio in the separate room (ZONE 2) while performing 7.1 ch playback in the main room (where this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms. For the "NET", "BLUETOOTH", or "USB" input selector, you can select only the same source for the main room and separate room. If you select "NET" in the main room and then select "BLUETOOTH" in the separate room, the main room setting switches to "BLUETOOTH". You cannot select different stations of AM/FM broadcasts for the main room and separate room. Switch remote control mode Setting the ZONE control mode At the time of purchase, the remote controller is in the mode to control playback in the main room. To play a source in ZONE 2, set the remote controller to the ZONE control mode. To control the main room play again, restore the remote controller to the main room control mode. 1. While pressing and holding MODE, press ZONE 2 at least 3 seconds until the remote indicator blinks twice. • The mode of the remote controller switches to the mode to control ZONE 2. • To restore the main room control mode, while pressing and holding MODE, press MAIN at least 3 seconds until the remote indicator blinks once. Setting the ZONE control mode Setting the main room control mode Setting the main room control mode ZONE 2 MAIN MODE MODE 64 Front Panel≫ Rear Panel≫ Remote≫