Pioneer VSX-933 Instruction Manual English - Page 97

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Manual MCACC „„EQ Adjust If you perform Full Auto MCACC then settings are automatic, but you can also adjust the output volume of the range of each connected speaker to suit your own preferences. You can adjust the volume of the different sound ranges for each of the speakers. You can set three different equalizers in Preset 1 to 3. You can select up to 4 bands for the Subwoofer and 9 bands for all other speakers. Setting Item Front Left Center Front Right Default Value 0 dB 0 dB 0 dB Setting Details After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". Setting Item Height Left Height Right Default Value 0 dB 0 dB Setting Details After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. 97 Front Panel≫ Rear Panel≫ Remote≫