Pioneer VSX-933 Instruction Manual English - Page 86
Distance
View all Pioneer VSX-933 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Double Bass Default Value Off Setting Details This can be selected only when "Configuration" - "Subwoofer" is set to "Yes" and "Front" is set to "Large". Boost bass output by feeding bass sounds from the front left and right, and center speakers to the subwoofer. "On": Bass output will be boosted "Off": Bass output will not be boosted • The setting will not automatically be configured even if you performed Full Auto MCACC. Distance Set the distance from each speaker to the listening position. Setting Item Front Left Center Front Right Height Left Height Right Surround Right Default Value 10.0 ft/3.00 m 10.0 ft/3.00 m 10.0 ft/3.00 m 10.0 ft/3.00 m 10.0 ft/3.00 m 10.0 ft/3.00 m Setting Details Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. Specify the distance between each speaker and the listening position. Setting Item Surr Back Right Surr Back Left Surround Left Subwoofer Default Value 10.0 ft/3.00 m 10.0 ft/3.00 m 10.0 ft/3.00 m 10.0 ft/3.00 m Setting Details Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Default values vary depending on the regions. • The unit of distance can be changed by pressing the MODE button on the remote controller. When using the unit "feet", the setting is available in increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of 0.03 m from 0.03 m to 9.00 m. 86 Front Panel≫ Rear Panel≫ Remote≫