Pioneer VSX-933 Instruction Manual English - Page 115

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it. When reconnecting, be careful not to wind the HDMI cable since if wound the HDMI cable may not fit well. After reconnecting, turn off and on the unit and the connected device. • The AV receiver contains a microPC for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least 5 seconds, and then plug it back in. • Our company is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit's malfunction. Before you record important data, make sure that the material will be recorded correctly. When the unit is operating erratically 116 Try restarting the unit 116 Resetting the unit (this resets the unit settings to the default) 116 Troubleshooting 117 „„Power 117 „„Audio 117 „„Listening Modes 119 „„Video 120 „„Linked operation 120 „„Tuner 121 „„BLUETOOTH function 121 „„Network function 122 „„USB storage device 123 „„Wireless LAN Network 123 „„Multi-zone function (for compatible models only) 124 „„Remote Controller 124 „„Display 124 „„Others 124 115 Front Panel≫ Rear Panel≫ Remote≫