Pioneer VSX-933 Instruction Manual English - Page 98

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Surround Right Surr Back Right Default Value 0 dB 0 dB Setting Details After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. Setting Item Surr Back Left Surround Left Subwoofer Default Value 0 dB 0 dB 0 dB Setting Details After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. After selecting the speaker frequency from between "31 Hz" and "250 Hz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • This cannot be selected if "No" is set in "System Setup" - "Speaker" - "Configuration" "Subwoofer". • The result may not be as expected depending on the input source and listening mode setting. • If you want to make the adjustments while listening to something, press on the remote controller, and select the Preset you want to adjust in "AV Adjust" - "MCACC" - "Manual EQ Select" first. 98 Front Panel≫ Rear Panel≫ Remote≫