Poulan PPBV25 Owner Manual - Page 6

4. Align the tabs on the inside of the vacuum inlet with the slots on the upper vacuum tube. Tab Slot 5. Push the upper vacuum tube into the vacuum inlet. Turn the tube counterclockwise until a click is felt to secure the tube to the blower unit. 6. Align slanted end of lower vacuum tube as shown. Firmly push lower vacuum tube into upper vacuum tube. HOW TO CONVERT UNIT FROM VACUUM USE TO BLOWER USE WARNING: While blowing debris, hold the unit with the muffler side facing away from your body and clothes (see OPERATING POSITION). 1. Remove the elbow tube and vacuum bag by turning the bolt counterclockwise to loosen the elbow tube. 2. Remove the vacuum tubes by turning the tubes clockwise. 3. Close the vacuum inlet cover and make sure it is latched closed. 4. Reinstall the blower tubes (see BLOWER TUBE ASSEMBLY). VACUUM BAG SHOULDER STRAP ADJUSTMENT WARNING: While vacuuming debris, hold the unit with the muffler side facing away from your body and clothes (see OPERATING POSITION). 1. Pass the shoulder strap over your head and onto your left shoulder. 2. Extend your right arm toward the rear of the vacuum bag. 3. Adjust shoulder strap until the vacuum bag/shoulder strap seam lies between your thumb and index finger. 4. Make sure air flows freely from the elbow tube into bag. If bag is kinked, the unit will not operate properly. Slanted end of lower vacuum tube 7. Permanently assemble the two tubes together with the supplied screw. Lower Vacuum Tube Upper Vacuum Tube -- 6 --