ProForm 490 Le Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver wrench , and a rubber mallet . , an adjustable Use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. M4 Split Washer (112)-8 M4 Washer (102)-8 M8 Split Washer (90)-3 Wave Washer (111)-2 M8 Washer (88)-6 M8 Jam Nut (79)-5 M10 Locknut (81)-2 M4 x 16mm Blunt Screw (104)-8 M4 x 16mm Round Head Screw (101)-8 M4 x 32mm Round Head Screw (105)-6 M4 x 47mm Screw (108)-2 Hub Screw (87)-8 M8 x 23mm Shoulder M8 x 23mm Button Screw (115)-4 Screw (84)-4 M8 x 41mm Button Bolt (78)-4 M8 x 69mm Button Bolt (80)-1 M10 x 80mm Carriage Bolt (82)-2 M10 x 127mm Button Screw (83)-2 5