ProForm 490 Le Elliptical English Manual - Page 9

7. The Console (5) can use four D batteries (not included); alkaline batteries are recom- 7 mended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic components. Remove the battery cover, insert the batteries into the battery compartment, and reattach the battery cover. Make sure to orient the bat- teries as shown by the diagram inside the battery compartment. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. 8. While another person holds the Console (5) near the Upright (3), connect the wire har- 8 ness on the Console to the Upper Wire Harness (48). Insert the excess wire harness into the Upright (3). Tip: Avoid pinching the wires. Attach the Console (5) to the Upright (3) with four M4 x 16mm Round Head Screws (101). Cover Batteries 5 5 48 101 Wire Harness 3 Avoid pinching the wires 9