ProForm 490 Le Elliptical English Manual - Page 7

3. Attach the Rear Stabilizer (7) to the Frame (2) with two M10 x 127mm Button Screws 3 (83). Next, hold the handle on the Frame (2), press the Latch Button (68), and lower the Frame until the Rear Stabilizer (7) rests on the floor. 83 7 Handle 2 68 4. Hold a Hub Cover (75) and a Crank Arm (36) against the Crank (45). 4 Align the holes in the Hub Cover (75) and the Crank Arm (36) with the unused holes in the Crank (45). 43 98 36 45 Insert four Hub Screws (87) into the Hub Cover (75) and the Crank Arm (36), and fin- ger tighten the Hub Screws into the Crank (45). Tighten one Hub Screw, and then tighten the Hub Screw across from the 36 first Hub Screw. Then, tighten the 75 remaining two Hub Screws. 87 Repeat this step on the right side of the elliptical. Make sure that the Crank Arms (36) are oriented with the Crank Bushing Sleeves (43) in the positions shown. Note: There are no Pulley Screws (98) on the right side. 87 43 7