RCA CC4352 User Guide - Page 15
Adapter/Charger, Attaching, Removing, Powering Your Camcorder - power supply
UPC - 034909820223
View all RCA CC4352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Power Your Camcorder Use the AdaptePr/oCwherainrggeYroutor CPaomwceorrdYeor ur Camcorder The adapter/charger attaches to the camcorder and lets you power your camcorder directly from standard household power. The adapter/charger operates on 120 volts, 50/60 Hz, and can be used to power the camcorder or recharge the battery. Caution: Do not attempt to use a "power converter" to use your AC adapter/ charger on a power source other than 120 volts, 50/60 Hz, or the adapter/charger and camcorder may be damaged. If you wish to operate the AC adapter/charger on a power source other than 120 volts, 50/60 Hz, use only a transformer-type power converter. Do not use "solid-state" or "switching-type" power converters. They will damage your AC adapter/charger. An optional CPS014, shown on page 51, is designed for use on 100-240 volts, 50/60 Hz. To AC 120V, 50/60 Hz POWER Indicator DC IN 9.6V Jack POWER CHARGE Adapter/ Charger DC OUTPUT Jack DC Cable Caution: Do not use this adapter/charger for any other purpose other than charging the EP096FS or EP096FL battery pack or supplying power to the camcorder. Attach Adapter/Charger Adap1t.erA/Ctthacahrgoenre end of the adapter/ charger's DC cable to the DC AttachinOgUTPUT jack on the adapter/charger. Rem2o.vinAgttach the other end of the cable to the DC IN 9.6V jack on the camcorder. 3. Plug the adapter/charger's plug into an operating outlet. The POWER indicator on the adapter/charger lights when it is properly connected. Notes: The adapter/charger cannot charge the battery and operate the camcorder at the same time. If you connect both, the adapter/charger powers the camcorder. Remove the adapter/ 12 charger's cable from the DC OUTPUT jack to charge the battery. When using the adapter/charger to power the camcorder, the battery level indicator might display . This indicator is used for battery operation and has no meaning when using the adapter/charger to power the camcorder. Remove Adapter/Charger 1. Unplug the adapter/charger from the wall outlet. 2. Remove the DC cable from the adapter/charger and camcorder.