RCA CC4352 User Guide - Page 16
Using the Battery, Charging - dc cable
UPC - 034909820223
View all RCA CC4352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Power Your Camcorder Use the Battery to Power Your Camcorder Charge the Battery Using the Battery The battery must be charged before it cCahnabreguinsged the first time. Initial charging takes approximately two hours. The camcorder's operating time depends on how often you turn the power on and off and how much you use the monitor, zoom, and pause. To conserve battery power, turn the camcorder off during recording breaks. To AC 120V, 50/60 Hz WARNING; LEAD ACID BATTERY. MUST BE DISPOSED OF PROPERLY. CHARGE Indicator Rechargeable Battery (Hold battery flush and slide down.) Align Arrows Adapter/ Charger Caution: When a battery is attached to the adapter/charger, do not turn them upside down. The battery might fall off and be damaged or cause injury. Charge the Battery If the DC cable is attached to the DC OUTPUT jack on the adapter/charger, remove it. 1. Align reference mark on battery with mark on adapter/charger. 2. Hold the battery flush against the adapter/charger and slide it in the direction of the arrow. 3. Plug adapter/charger into nearest AC outlet (120V, 50/60Hz). 4. If the battery is properly connected, the adapter/charger's CHARGE indicator lights. Note: Your battery will provide better service if you charge it before and after use and store it at room temperature. 5. Remove the charged battery by sliding it up and off the adapter/charger. 6. Attach the charged battery to the camcorder as shown on the next page. 13