RCA CC4352 User Guide - Page 46
To Play Back a Tape - internal battery
UPC - 034909820223
View all RCA CC4352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Playback Use the LCD Monitor or Viewfinder for Playback (continued) To Play Back a Tape 1. Attach a power supply. Attach the adapter/charger, charged battery, or optional car cord. 2. Insert a tape. • Press STOP/EJECT to open the cassette compartment. • Insert the cassette with the safety tab facing up and the tape windows facing out. • The camcorder can only play back tapes recorded in the SP speed. • Press the cassette down gently until it locks into place, and close the cassette compartment door. 3. Press and hold the small red button on the CAMERA/OFF/VCR switch while you set it to VCR. 4. Use the LCD monitor or viewfinder to view what you are playing back. Use the LCD Monitor • Press the OPEN button to open the LCD monitor. Make sure the monitor is open at least 45º. The viewfinder automatically turns off. • You can rotate the monitor around when it is open 90º and place it back against the camcorder. • Fit the shoulder extension pad to your shoulder for convenient viewing using the LCD monitor. • To adjust the brightness of the image in the monitor, turn the bright control. • To adjust the speaker volume, turn the volume control. Note: The monitor may become warm when left open for an extended period of time. This is normal. Use the Viewfinder • Make sure the monitor is closed and locked. If the monitor is open more than 45º, the viewfinder automatically turns off. • Grasp the viewfinder and rotate it horizontally. • Pull the viewfinder out from the camcorder and rotate the eyepiece to a comfortable viewing position. Caution: Pulling on the eyepiece might cause damage to the eyepiece or camcorder. • Turn the eyepiece focus control to adjust the focus of the viewfinder for your vision. Note: You cannot hear the sound from the internal speaker when using the viewfinder for playback. 5. Press PLAY to begin playback. • If necessary, adjust tracking. • During playback, use the playback features on the following pages. 6. Press STOP/EJECT when you are finished. 43