Radio Shack 15-2138 Owners Manual - Page 15

OWNER'S MANUAL 4. Press a device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD). The selected device key will animate. NOTE: Refer to the "Device Table" on page 12 when choosing a device key for programming. 5. Use the Manufacturer's Codes (starting on page 118) to locate the type of device and brand name and then use the number keys to enter the first four-digit code for your device. If performed correctly, the bottom IR segment will flash twice. NOTE: If the bottom IR segment displays one long flash instead, a mistake has occurred. Try entering the same code again. 6. Aim the remote at the device and press PWR once. The device should turn off. If it does not, repeat steps 5 and 6, trying each code for your brand until you find one that works. If it still doesn't work, try Searching For Your Code on page 17. 7. If the code works, press OK once. The bottom IR segment flashes twice. 8. If desired, repeat steps 4 through 7 for each device you want to con- trol.When finished, press twice to exit programming and return to the last-selected device menu screen. 9. For future reference, write down each working device code in the following boxes: CBL Code: Brand Name SAT Code: Brand Name TV Code: Brand Name DVD Code: Brand Name AUD Code: Brand Name VCR Code: Brand Name AUX Code: Brand Name CD Code: Brand Name Programming A Device 15