Reebok Super Ramp Rl 7.0 Elliptical English Manual - Page 6

ASSEMBLY To hire an authorized service technician to assemble the elliptical, call 1-800-445-2480. Assembly requires two persons. Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. To identify small parts, see page 5. In addition to the included tool(s), assembly requires the following tools: one adjustable wrench one Phillips screwdriver Assembly may be easier if you have a socket set or a set of ratchet wrenches. To avoid damaging parts, do not use power tools. 1. Remove the two packing inserts from the packing materials. With the help of another person, 1 place the packing inserts under the front of the Frame (1) as shown. Have the other person hold the elliptical to prevent it from tipping until this step is completed. Hold the Front Stabilizer (2) under the Frame (1). Attach the Front Stabilizer with four 3/8" x 2 1/2" 1 Patch Screws (88). With the help of the other person, remove the packing inserts and lower the Front Stabilizer (2) and the Frame (1). 2 Packing Inserts 88 88 6