Ricoh 1180L Operating Instructions - Page 32

5 - Parameters/Setup Laser Facsimile 1 Select Automatic and confirm with OK. 2 To exit this menu, press . Manual mode : The machine proposes a 70 to 100 % reduction. Outside these values, the machine beeps for error. This fixed reduction will be used when printing received documents, regardless of the used paper format. To set the manual mode : 246 - SETUP / RECEPTION / REDUCTION 1 Select FIXED and confirm with OK. 2 Enter the reduction value (between 70 and 100) and confirm with OK. 3 To exit this menu, press . Technical Parameters As delivered your machine is preset by default. However, you may adjust it to meet your requirements by resetting the technical parameters. To set the technical parameters: 29 - SETUP / TECHNICALS 1 Select the desired parameter and confirm with OK. 2 With the buttons or , modify the parameter settings by following the table below and press OK. Parameter Signification 1 - Scanning mode Default value of the scan mode resolution for the documents to be transmitted. 2 - TX header If this parameter is on, your header will appear on all documents sent to your subscribers with your name, number, date and number of pages. Warning: If you send a fax from the document loader, the transmission header will not appear on the document your correspondent receives. 3 - TX speed Transmission speed for outgoing documents. For a quality telephone line (compatible, no echo), communications occur at maximum speed. However, it may be necessary to restrict the transmission speed for some calls. Parameter 4 - Echo protect 6 - EPT mode 7 - COM. display 8 - Eco energy 10 - RX header 11 - RX speed 12 - Rings 13 - Discard size 20 - E.C.M. Signification If this parameter is on, the on-line echo will be reduced during long distance calls. For some long distance calls (satellite), the on-line echo may disturb the call. Choice between transmission speed displayed or number of the page in progress. Choosing the printer standby delay: the printer will switch to standby after a delay (in minutes) of NON-operation or during the period of time of your choice. If this parameter is on, all documents received by your fax will include the subscriber's header with his name, number (if available) fax print date and the page number. Transmission speed for incoming documents. For a quality telephone line (compatible, no echo), communications occur at maximum speed. However, it may be necessary to restrict the transmission speed for some calls. Number of rings to automatically start your machine. The Discard Size parameter only defines the printing of received faxes . The number of lines of a document can be too high for the printing paper format. This parameter defines the threshold beyond which the extra lines are printed on a second page. Bellow this threshold, extras lines are deleted. If you choose With, the threshold is set on 3 centimeters. If you choose Without, the threshold is set on 1 centimeter. This parameter helps correct the calls made on disturbed telephone lines. It is used when the lines are weak or too noisy. Transmission times may be longer. - 29 -