Ricoh 3045 Fax Guide - Page 21

❖ IP-Fax Settings Function name Enable H.323 Enable SIP H.323 Settings SIP Settings Program / Change / Delete Gateway Description Specify whether or not H.323 is used for IPFax transmission. Specify whether or not SIP is used for IP-Fax transmission. Set the IPv4 address or host name of gate keeper, and alias telephone number. Set the SIP server's IPv4 address or host name, and SIP user name. Register, change, or delete the gateway used for transmission to IP-Fax. ❖ Administrator Tools Function name Program / Change / Delete Standard Message Store / Change / Delete Auto Document Program / Change / Delete Scan Size Print Journal Transmission Page Count Forwarding Memory Lock RX ECM Parameter Setting Program Special Sender Box Setting Description Use this function to program standard messages to be printed at the top of the first page of the original. You can program, change, or delete pages stored as auto documents. You can program, change, or cancel frequently used sizes. The Journal allows you to check a maximum of the last 50 communications (receptions and transmissions) performed by the machine. This function allows you to check the total number of pages transmitted and received. This function allows you to have documents printed on the machine, and sent to a specified End Receiver. When you switch Memory Lock on, received documents are stored in memory and not printed automatically. If part of a transmission fails because of a line problem, the lost data is automatically resent. User Parameters allow you to customize various settings to suit your needs. By programming particular receivers as Special Sender in advance, you can have Special Senders treated differently. The following functions are for delivery and transfer of documents: Personal Box, Information Box, Transfer Box. 11