Ricoh AC205 User's Guide - Page 4

CAUTION: • Protect the machine from dampness or wet weather, such as rain and snow. • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. • When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). • Do not allow paper clips, staples, or other small metallic objects to fall inside the machine. • Keep toner (used or unused) and toner bottle out of the reach of children. • Be careful not to cut yourself on any sharp edges when you reach inside the product to remove misfed sheets of paper or masters. • For environmental reasons, do not dispose of the machine or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer. • The inside of the machine could be very hot. Do not touch the parts with a label indicating the " ". Otherwise, an injury might occur. Power Supply The socket-outlet shall be in stalled near the product and shall be easily accessible. Ozone Safety This product generates ozone during operation. Normally, the ozone level is safe for operators. If ozone odor may appear, ventilate the room. For Fax or Telephone When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following; Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use a telephone in the vicinity of a gas leak to report the leak. Use only No. 26 AWG or larger telecommunication line cord. SAVE THESE INSTRUCTIONS Laser Safety: This equipment is considered a class 1 laser device. This equipment contains a 5 milliwatt, 770795 nanometer wavelength, AlGaAs laser diode. The following marking is attached on the back of the equipment. Caution: Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. iii