Ricoh Aficio SP C830DN Manuals - Page 98
Classification Code is, Authentication or Windows
View all Ricoh Aficio SP C830DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
3. Troubleshooting Message Cause Solution "85: Error" The specified graphics library is unavailable. • Check that the data is valid. • Decrease the number of files sent to the printer or install the optional SDRAM module. For details about installing SDRAM module, see "Installing the SDRAM module", Operating Instructions. "86: Error" Parameters of the control code are invalid. Check the print settings. "91: Error" Printing was canceled by the Check that the data is valid. auto job cancel function due to a command error. "92: Error" Printing was canceled because [Job Reset] or the [Suspended] key was selected on the printer's control panel. Perform the print operation again as necessary. "98: Error" The printer could not access the hard disk correctly. Turn the main power switch off and then back on again. If the message appears frequently, contact your service representative. "Address Book is currently in use by another function. Authentication has failed." The printer currently cannot perform authentication because the Address Book is being used by another function. Wait a while, and then retry the operation. "Auto-registration of user information has failed." Automatic registration of information for LDAP Authentication or Windows Authentication failed because the Address Book is full. For details about automatic registration of user information, see Security Guide. "Classification Code is incorrect." The classification code has not been entered, or the classification code has been entered incorrectly. Enter the correct classification code. 96