Ricoh IS760 Operating Instructions - Page 28
Connecting the SCSI Cable (When the Scanner is at the End of the Daisy Chain)
View all Ricoh IS760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Setting up the Scanner Connecting the SCSI Cable (When the Scanner is at the End of the Daisy Chain) A Shut down the computer and all of the SCSI connected devices. B Daisy chain the computer, scanner and SCSI connected devices. 2 ADC018S Note ❒ Connect the SCSI cable to either one side of the connectors. C Open the cover of the switch box on the lower left of the frontside of the scanner. ADC015S Note ❒ Push the knob of the cover to the left and pull the cover to open. D Set the DIP Switch No.3 to the OFF position. ADC019S 24 Built-in SCSI terminator is enabled.
Setting up the Scanner
24
2
Connecting the SCSI Cable (When the Scanner is at the End of the Daisy Chain)
A
Shut down the computer and all of the SCSI connected devices.
B
Daisy chain the computer, scanner and SCSI connected devices.
Note
❒
Connect the SCSI cable to either one side of the connectors.
C
Open the cover of the switch box on the lower left of the frontside of the
scanner.
Note
❒
Push the knob of the cover to the left and pull the cover to open.
D
Set the DIP Switch No.3 to the
OFF
position.
Built-in SCSI terminator is enabled.
ADC018S
ADC015S
ADC019S