Ricoh IS760 Operating Instructions - Page 70
When the Originals are Not Fed Correctly, When Scanning is Not Performed as Expected
View all Ricoh IS760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Appendix When the Originals are Not Fed Correctly A Remove the originals from the ADF. B Lift the Pressure Panel or open the ADF cover. ADC048S Unusual conditions of the Original Table will be corrected. C Shutdown the Pressure Panel or the ADF cover. 6 Note ❒ When you shut the ADF cover, please confirm the two magnets are fixed on the magnet catch and the cover is closed tightly. When Scanning is Not Performed as Expected Condition The scanned image is dirty. The originals are damaged when fed to the ADF. Image is distorted or out of position. Possible Cause and Required Action • The Exposure Glass, the ADF Exposure Glass, Background panel, Feed roller or Original Roller is dirty. • Clean the Exposure Glass, the ADF Exposure Glass, Background panel, Feed roller or Original Roller. ⇒ p.71 "Cleaning" • Set the paper thickness changeover lever correctly or it may damage originals. Please confirm the lever and the paper thickness of the originals. When you scan the originals thicker than 128g/m2 (242.5bls), turn the changeover lever on your side (thick paper mode). • The original was moved while scanning. Do not move the original while scanning. • The original was not pressed flat against the exposure glass. Make sure that the original is pressed flat against the exposure glass. 66