Ricoh IS760 Operating Instructions - Page 34
Repeat Steps, second computer.
View all Ricoh IS760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Setting up the Scanner B Confirm the DIP Switch No.2 is in the ON position. 2 ADC080S Note ❒ If the DIP Switch No.2 is set to OFF, set it to ON. If the switch is set to OFF, "Found New Hardware Wizard" will not start. . ❒ Press the Hard Reset Switch if you changed the DIP Switch while the pow- er is ON. ⇒ p.34 "Using the Hard Reset Switch" C Connect the IEEE1394 cable to the IEEE1394 connector. ADC023S Note ❒ Connect the cable to either one of the connectors. D Connect the other side of the cable to the IEEE1394 connector on your com- puter. E Repeat Steps C and D with the other IEEE1394 connector to connect with a second computer. 30
Setting up the Scanner
30
2
B
Confirm the DIP Switch No.2 is in the
ON
position.
Note
❒
If the DIP Switch No.2 is set to OFF, set it to ON. If the switch is set to OFF,
"Found New Hardware Wizard" will not start. .
❒
Press the Hard Reset Switch if you changed the DIP Switch while the pow-
er is ON.
⇒
p.34
“
Using the Hard Reset Switch
”
C
Connect the IEEE1394 cable to the IEEE1394 connector.
Note
❒
Connect the cable to either one of the connectors.
D
Connect the other side of the cable to the IEEE1394 connector on your com-
puter.
E
Repeat Steps
C
and
D
with the other IEEE1394 connector to connect with a
second computer.
ADC080S
ADC023S