Ricoh IS760 Operating Instructions - Page 30
Connecting the SCSI Cable (When the Scanner is not at the End of the Daisy Chain)
View all Ricoh IS760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Setting up the Scanner Connecting the SCSI Cable (When the Scanner is not at the End of the Daisy Chain) A Shut down the computer and all of the SCSI connected devices. B Daisy chain the computer, scanner and SCSI connected devices. 2 ADC020S C Open the cover of the switch box on the lower left of the frontside of the scanner. ADC015S Note ❒ Push the knob of the cover to the left and pull the cover to open. D Set the DIP Switch No.3 to the ON position. ADC021S Built-in SCSI terminator is disabled. 26
Setting up the Scanner
26
2
Connecting the SCSI Cable (When the Scanner is not at the End of the Daisy Chain)
A
Shut down the computer and all of the SCSI connected devices.
B
Daisy chain the computer, scanner and SCSI connected devices.
C
Open the cover of the switch box on the lower left of the frontside of the
scanner.
Note
❒
Push the knob of the cover to the left and pull the cover to open.
D
Set the DIP Switch No.3 to the ON position.
Built-in SCSI terminator is disabled.
ADC020S
ADC015S
ADC021S