Samsung 242MP User Manual - Page 20
Connecting DVD/DTV Set Top Box, Select TV using
View all Samsung 242MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1. Connect the CATV or antenna coaxial cable to the Antenna terminal on the rear of the monitor. You need to use a coaxial antenna cable. When using an interior antenna terminal: Check the antenna terminal on the wall first and connect the antenna cable. When using an outdoor antenna: If you are using an outdoor antenna, use a professional for installation if possible. To connect the RF cable to the antenna input terminal: Keep the copper wire portion of the RF cable straight. 2. Turn on the monitor. 3. Select TV using SOURCE button among the external signal adjustment buttons. 4. Select a desired TV channel. Is weak signal causing poor reception? Purchase and install a signal amplifier for better reception. In areas where Antenna cable is not supported, first, attach connector to TV antenna . 3. Connecting DVD/DTV Set Top Box Connect to the DVD/DTV Set Top Box input if the device has a DVD/DTV connector. You can watch Component simply by hooking up the Component with the monitor as long as the power is on.