Samsung CLX-9352NA Installation Guide Easy Manual Ver.3.00 (English) - Page 37

Device name, Location, Administrator, Connected, Not connected

Get Samsung CLX-9352NA PDF manuals and user guides View all Samsung CLX-9352NA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

3. Press the Device name input area. The pop-up keyboard appears. Remove the existing device name and enter the device name you want to use and then press OK. Then press Next. Keep in mind to enter the device name to be used on the network. • If necessary, enter the location of the machine in the Location input area. • If necessary, enter the information in the Administrator input area for the person to contact when any problem occurs on the machine. 4. Press the Test button to verify the LAN connection. When Connected appears after pressing Test, press Next. If Not connected appears, make sure that the machine is connected to the network then verify the LAN connection again. • If a network connection problem persists, contact your network administrator. • If you installed an optional fax kit or finisher, press each Test button for verify connection of them. Initial settings and testing of the machine_ 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Initial settings and testing of the machine
_ 36
3.
Press the
Device name
input area.
The pop-up keyboard appears.
Remove the existing device name and enter the device name you want to use and then press
OK
. Then press
Next
.
Keep in mind to enter the device name to be used on the network.
•
If necessary, enter the location of the machine in the
Location
input area.
•
If necessary, enter the information in the
Administrator
input area for the person to contact when any
problem occurs on the machine.
4.
Press the
Test
button to verify the LAN connection. When
Connected
appears after pressing
Test
, press
Next
.
If
Not connected
appears, make sure that the machine is connected to the network then verify the LAN connection
again.
•
If a network connection problem persists, contact your network administrator.
•
If you installed an optional fax kit or finisher, press each
Test
button for verify connection of them.