Home » Samsung Manuals » Laser Printers » Samsung CLX-9352NA » Manual Viewer

Samsung CLX-9352NA Installation Guide Easy Manual Ver.3.00 (English) - Page 47

Otherwise, adjust the DADF using the screw at the backside and handle hinge as shown by the examples

Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Otherwise, adjust the DADF using the screw at the backside and handle hinge as shown by the examples below. Initial settings and testing of the machine_ 46

Section	Page
Copyright	2
Contentds	4
1. About this installation guide	5
This installation guide provides information about the installation of the machine as well as detailed explanation on how to install with step-by-step instructions. This installation guide is valuable for both novice and professional users. You can r...	5
1. Setting up the hardware	6
We recommend you leave to setting up the hardware to the installation engineer from Samsung or the dealership where you bought the machine.	6
This chapter gives you step-by-step instructions for setting up the hardware. We recommend you set up the hardware following the order in this chapter.	6
This chapter includes:	6
Installation environment	8
Machine configuration	9
Optional goods by models	10
Installation flow of the hardware	11
Unpacking and placing the hardware	12
1. Select a stable location.	12
Installing the cabinet stand, optional dual cassette feeder or optional high capacity feeder	13
Removing the scanner locking screw	14
Putting the rubber packings	14
Installing the toner cartridges	15
1. Open the front cover.	15
Installing the imaging units	17
CLX-9252/9352 Series	17
1. Squeeze the left/right locking levers and push outward at the same time. Then remove the waste toner container.	17
SCX-8230/8240 Series	22
1. Lift the locking lever upward. Then remove the waste toner container.	22
Installing other options	27
Loading paper	28
Standard tray	28
1. Squeeze the lock lever and pull out the tray.	28
Connecting a printer cable	33
Using a network cable	33
Turning the machine on	34
1. Plug the power cord into the power receptacle.	34
2. Initial settings and testing of the machine	36
After hardware installation is completed, initial settings and some tests are necessary before using the machine. This chapter gives you step-by-step instructions for initial settings and tests. For detailed information about setting up the machine, ...	36
This chapter includes:	36
Initial setting	36
1. Press a language for using on the display screen and then press Next.	36
Print adjustment (Dual cassette feeder or High capacity feeder)	42
1. Press Machine Setup from the display screen.	42
DADF skew test and adjustment	45
Skew test	45
1. Load the A4 (or LTR) DADF test chart face up into the DADF.	45
DADF adjustment	48
1. Load the A4 (or LTR) DADF test chart face up into the DADF.	48
3. Installing the supplied software	52
This chapter gives you step-by-step instructions for installing the supplied software. For the detailed information about supplied software, refer to the User’s Guide or Administrator’s Guide on the User’s Guide CD.	52
This chapter includes:	52
Supplied software	52
System requirements	53
Windows	53
Macintosh	53
Linux	53
UNIX	54
Installing a network connected machine’s driver	54
Windows	54
1. Make sure that the machine is connected to the network or USB and powered on.	54
Contact SAMSUNG worldwide	55
If you have any comments or questions regarding Samsung products, contact the Samsung customer care center.	55

Match case Limit results 1 per page

Initial settings and testing of the machine

_ 46

Otherwise

adjust the DADF using the screw at the backside and handle hinge as shown by the examples below.