Samsung DVD-VR375A User Manual (ENGLISH) - Page 31

Resolution (HDMI) This setting is used when the unit is connected by HDMI or DVI to Display devices (TV, Monitor, etc). • 480p : 720 x 480p • 720p : 1280 x 720p • 1080i : 1920 x 1080i • 1080p : 1920 x 1080p • AUTO : It will be set to the possible maximum resolution supported by the TV. • Connect the DVD-VR375 to your TV via HDMI or DVI. Set your TV's input to HDMI or DVI. Video Title List Timer Edit Dubbing Disc Setting Setup 12:00 AM TV Type Resolution (HDMI) Video(HDMI) Black Level Picture Control Progressive : 4:3 Letter Box : A✔utAouto : YCb1C92r0 x 1080p : On1920 x 1080i : Sta1n2d8a0rdx 720p : On720 x 480p > Move sEnter rReturn eExit l 480p l 720p l 1080i l 1080p - If the DVD Recorder is connected to your TV with Component cables (no HDMI/DVI cable connected), the output resolution mode toggles between 480p/480i. - You can also watch VCR output through HDMI (Video is upscaled to a maximum 1080p). ● SYSTEM SETUP Video (HDMI) Selects the type of output from the HDMI/OUT jack. • YCbCr : Normally, select this when connecting to an HDMI device. • RGB : Gives brighter colors and deeper black. Select this if colors are weak. Video Title List Timer Edit Dubbing Disc Setting Setup 12:00 AM TV Type Resolution (HDMI) Video(HDMI) Black Level Picture Control Progressive : 4:3 Letter Box : Auto : YCbCr : On : Standard : On > Move sEnter rReturn eExit Black Level Adjusts the black level of the screen. • On : This is the standard NTSC reference black level for consistent brightness/contrast across all sources. Select this when you want to make the screen darker. • Off : This will enhance the black level for increased brightness/ contrast when viewing DVDs. Select this when you want to make the screen lighter. Video Title List Timer Edit Dubbing Disc Setting Setup 12:00 AM TV Type Resolution (HDMI) Video(HDMI) Black Level Picture Control Progressive : 4:3 Letter Box : Auto : YCbCr : O✔nOn : StaOndffard : On > Move sEnter rReturn eExit Picture Control Selects the picture control for the video signals output from the AV output jacks. You can adjust the DVD video signal from the recorder to obtain the picture quality you want. Select the setting that best suits the program you are watching. • This function can only be used when you have the Video Out(AV out) jacks connected and does not work with Component and HDMI. • Dynamic 1 : Produces a bold dynamic picture by increasing the picture contrast and the color. • Dynamic 2 : Produces a more dynamic picture than "Dynamic 1" by further increasing the picture contrast and the color. Video Title List Timer Edit Dubbing Disc Setting Setup 12:00 AM TV Type Resolution (HDMI) Video(HDMI) Black Level Picture Control Progressive : 4:3 Letter Box : Auto : YCbDCyrnamic1 : OnDynamic2 : S✔taSntdaanrddard : OnCinema1 Cinema2 Personal • Standard : Displays a standard picture (function turned off ). > Move sEnter rReturn eExit • Cinema 1 : White colors become brighter and black colors become richer,and the color contrast is increased. • Cinema 2 : Enhances detail in dark areas by increasing the black level. • Personal : Adjusts Contrast, Brightness, Color and Hue using buttons. English _31