Samsung HL-T5055W Quick Guide (easy Manual) (ver.1.0) (English) - Page 19

Viewing the Menus 1 With the power on, press the MENU button. The main menu appears on the screen. Its left side has five icons: Picture, Sound, Channel, Setup, Input. 2 Use the ▲ or ▼ button to select one of the five icons. Then press the ENTER button to access the icon's sub-menu. 3 Press the EXIT button to exit. ➢ It takes about one minute until the on-screen menu disappears. Input Source List : TV ► Edit Name ► Move Enter Exit Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (air) and cable channels. After the available channels are memorized, use the CH and CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (manual). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV(i.e. an air or a cable system). 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Channel Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► 2 Press the ENTER button select Antenna. Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button. Press the MENU button. Move Enter Return Channel Antenna : AAiirr Auto Program Cable Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Move Enter Return Storing Channels in Memory (Automatic Method) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. 2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER button. 3 Press the ▲ or ▼ button to select the antenna connection, then press the ENTER button. ➢ Air : "Air" antenna signal. Cable : "Cable" antenna signal. Air+Cable : "Air" and "Cable" antenna signals. ➢ If the antenna is connected to ANT 1 IN(CABLE), select Cable and if it is connected to ANT 2 IN(AIR), select Air. ➢ If both ANT 1 IN and ANT 2 IN are connected, select the Air + Cable. ➢ If you selected Air, then go to step 5. Channel Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Move Enter Return Auto Program Selects the antennas to memorize. Air Cable Air + Cable Start Start Start Move Enter Return Continued... English - 19