Samsung HMX-R10SN User Manual (ENGLISH) - Page 77
Focus
View all Samsung HMX-R10SN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Focus The camcorder usually focuses on a subject automatically (auto focus). When the camcorder is turned on, auto-focus will always be set. You can also manually focus a subject depending on the recording conditions. PRECHECK! Select the Video ( ) or Photo ( ) mode by pressing the MODE button. page 33 1. Touch the Menu ( ) tab "Focus." 90 MIN 2. Touch a desired submenu item. 3. To exit the menu, touch the Exit ( ) or Return ( Submenu items ) tab. Super C.Nite Back Light 3 / 6 Focus Face Detection • Auto: In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. • Manual ( ): Manual focusing may be necessary under certain conditions that make automatic focusing difficult or unreliable. Touch ( ) or ( ) tab to adjust the setting values you want. • Touch Point ( ): You can simply touch the subject shown on the LCD screen you would like to focus. (Video Record mode only) Understanding the Touch Point Focus Auto Manual 1 / 1 Touch Point Focus 70CM Using the Touch Point function, you can focus on a small section of the picture. The Touch Point function is only available in video recording mode. However, you can also adjust the focus in the photo recording mode, see "Magic Touch," page 75. STBY 00:00:00 [55Min] 90 MIN Tip To activate the Touch Point with a long touch You can use the Touch Point function by pressing the section for about 2 seconds on the LCD screen. (excluding when "Super Macro," "Face Detection," "Digital Zoom," or "Slow Motion" is set.) • The Auto Focus(AF) setting is useful when you operate the zoom function because you might not be able to keep accurate focus after the zoom ratio has been changed. • In the manual focus setting menu screen, auto focus is available by using the AF ( ) tab on the screen. you can return to manual focus by touching the manual focusing tabs. • When the Touch Point function is enabled, you can touch the AF ( ) tab on the LCD screen to set the "Focus" to "Auto." • To disable the Touch Point function, set "Focus" to "Auto." 73