Samsung HT-C9950W User Manual (user Manual) (ver.1.0) (English) - Page 24
English, Insert the Pole Holder into the notch at the top
View all Samsung HT-C9950W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Getting Started 12. Tip the stand slightly, and then press the cable on the bottom into the notch in the stand base 12 bottom. - Loosen the screw on one end of the cable bracket on the bottom of stand base and turn the cable bracket aside. Arrange the system cable so it will pass under the bracket, and then turn the cable bracket back to its original position. Tighten it down with the screw. 13. Insert the Pole Holder into the notch at the top of the stand pole. 13 - The Pole Holder holds the cable in place. 14. Diagram 14 shows the Control Unit installed properly on the Tallboy type of stand. 14 24 English
24
English
Getting Started
Tip the stand slightly, and then press the cable
on the bottom into the notch in the stand base
bottom.
-
Loosen the screw on one end of the cable
bracket on the bottom of stand base and turn
the cable bracket aside. Arrange the system
cable so it will pass under the bracket, and
then turn the cable bracket back to its original
position. Tighten it down with the screw.
12.
Insert the Pole Holder into the notch at the top
of the stand pole.
-
The Pole Holder holds the cable in place.
13.
13
14
Diagram 14 shows the Control Unit installed
properly on the Tallboy type of stand.
14.
12