Samsung HT-C9950W User Manual (user Manual) (ver.1.0) (English) - Page 34
Connecting the FM Antenna
View all Samsung HT-C9950W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Connections HDMI Auto Detection Function The product's video output automatically changes to HDMI mode when connected to a TV or other device with an HDMI cable while the power is on. • Auto Detection is not available if the HDMI cable does not support CEC. • HDMI connection description - HDMI outputs only a pure digital signal to the TV. - If your TV does not support HDCP, random noise appears on the screen. • What is the HDCP? HDCP (High-band width Digital Content Protection) is a system for protecting BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made. ! CAUTION The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the product. Connecting the FM Antenna FM Antenna (supplied) 1. Connect the FM antenna supplied to the FM ANT Jack. 2. Slowly move the antenna wire around until you find a location where reception is good, and then fasten the antenna to a wall or other rigid surface. ✎ NOTE This product does not receive AM broadcasts. 34 English