Samsung HT-C9950W User Manual (user Manual) (ver.1.0) (English) - Page 37
Wireless Network
View all Samsung HT-C9950W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
02 Connections Wireless Network You can connect the home thaeater to a network through a Wireless IP sharer (either a router or modem). 1. Connect the suppplied wireless LAN adapter to the Wireless LAN Adapter jack on the rear panel of the product. - This unit is compatible with the supplied Wireless LAN Adapter. 2. Set the network options. (See page 49) Broadband service Wireless IP sharer PC Networking with PC for AllShare function (See pages 75~76) Wireless LAN Adapter ✎ NOTE You must use a wireless IP sharer (router or modem) that supports IEEE 802.11 a/b/g/n. We recommend using IEEE 802.11n for stable operation of the wireless network. Wireless LAN, in its nature, may cause interference, depending on the operational conditions (AP performance, distance, obstacle, interference by other radio devices, etc.). Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported. The home theater supports the following wireless security key protocols: 1) Authentication Mode : WEP, WPAPSK, WPA2PSK 2) Encryption Type : WEP, AES To use the AllShare function, you must connect a PC must be connected in the network as shown in the figure above. The connection can be wired or wireless. 37 English