Samsung HT-C9950W User Manual (user Manual) (ver.1.0) (English) - Page 35
Connecting Audio from External Components
View all Samsung HT-C9950W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
02 Connections Connecting Audio from External Components Attach the ferrite core (Large) as close to AUX IN as possible with no loop of core made on the audio cable. Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. Red White VCR AUX Optical Cable (not supplied) Set-Top Box OPTICAL OPTICAL : Connecting an External Digital Component For components with digital optical audio signals such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the product to the Digital Audio Output of the external digital component using a digital optical cable. 2. Press the FUNCTION button to select D.IN input. • The mode switches as follows : BD/DVD D. IN AUX iPod HDMI1 HDMI2 TUNER ✎ NOTE To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV. This system supports Digital sampling frequencies of 32 kHz of higher from external digital components. This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported. AUX : Connecting an External Analog Component For analog audio signal components such as a VCR. 1. Connect AUX IN (Audio) on the product to the Audio Out of the external analog component. • Be sure to match connector colors. 2. Press the FUNCTION button to select AUX input. • The mode switches as follows : BD/DVD D. IN AUX iPod HDMI1 HDMI2 TUNER ✎ NOTE You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product. 35 English