Samsung HT-H5500W User Manual Ver.1.0 (English) - Page 20

Settings ĞĞ Wireless - Automatic Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 19) 1. In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks. Network Settings Select your network type. Network Type Wireless Wireless network 㾎 si-ap MIC KIMING_VTOWER You can connect your BD Home Theater to the internet. Please select which wireless network to use. WPS(PBC) Search m Move " Select ' Return 2. Select the desired network, and then press the v button. 3. On the Security screen, enter your network's security code or pass phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with buttons, and then pressing v button. 4. When finished, select Done, and then press the v button. The product verifies the network connection and then connects to the network. ✎✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem. ĞĞ Wireless - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 19) 1. In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks. 2. Scroll through the list, select the desired network or Add Network, and then press the v button. 3. If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4. 4. Enter your wireless network or wireless router's name. ●● Enter numbers directly using the number buttons on your remote control. ●● Enter letters by selecting a letter with the buttons, and then pressing the v button. ●● To display capital letters (or redisplay lower case letters if capital letters are displayed), select , and then press the v button. ●● To display symbols and punctuation, select 123#&, and then press the v button. To redisplay letters, select 123#&, and then press the v button. When finished, select Done, and then press the v button. 5. On the Security method screen that appears, use the ▲▼ buttons to select the network's Security method, and then press the v button. On the next screen, enter your network's security code or pass phrase. ●● Enter numbers directly using the number buttons on your remote control. ●● Enter letters by selecting a letter with the buttons, and then pressing the v button. When finished, select Done, and then press the v button. The product searches for the network. 6. The Network connection fail screen appears. Use ◀▶ buttons to select IP Settings, and then press the v button. 7. Select the IP Setting field, and then set it to Enter manually. 8. Select a network parameter to enter (IP Address, for example), and then press v button. Use the number keypad on your remote control to enter the numbers for the parameter. You can also enter numbers using the ▲▼ buttons. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a parameter. When done with one value, press the v button. 9. Press the ▲ or ▼ button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 8. 10. Repeat Steps 8 and 9 until you have filled in all parameters. 20 - English